TYPE OF INSTRUMENTATION VALVES

NEEDLE VALVES MANUFACTURER IN INDIA, STAINLESS STEEL NEEDLE VALVES, MONEL 400 BRASS NEEDLE VALVES

HIGH PRESSURE NEEDLE VALVES AVAILABLE IN STAINLESS STEEL 316, MONEL ALLOY 400 BRASS HASTELLOY INCONEL

INTEGRAL BONNET NEEDLE VALVES EXPORTER NEEDLE VALVES WITH PRESSURE RATING OF 6000 PSIG (410BAR)

1.Full flow of throttle :which is a wide range for valves use,because valves are designed in a way way to reduce pressure losses for fluids passing through theses valves,diaphragm valve is used with dangerous and toxic liquids.

2,Flow regulating: Sometimes we need to regulate flow by changing calve positions between fully open and fully closed and throttling the valve reducing the flow,this is accomplished by using control valves.

3.One-Way flow: Sometimes we need to prevent liquid in the reverse way,this type of  valves is installed at the pump or compressor discharge lines to prevent liquid and gas back flow when shut down these equipment.Check valve is a good example for this kind of valve.

Valves Range & Type

Needle Valves
Ball Valves
Manifold Valves
Gauge RootValves
Check Valves
Block and Bleed Valves
Pressure Relief Valves (PRV)

Available in:
StainlessSteel
Carbon Steel /Alloy Steel
Nickel/ Copper BasedAlloys

Double Ferrule Ends, Single Ferrule Ends, Threaded – NPT, BSP, BSPT, UNF, Metric etc., INSTRUMENTATION VALVES, Socket Weld Ends, Customized, Forged or Made from Bars

error: Content is protected !!